![]() Three-piece slates tend to be at least 1/4″ thicker than their one-piece cousins. No amount of shimming or tweaking can remove these. Especially on the bigger 8′ slate pieces. There can be natural low or high spots in the stone. There is the issue of leveling the playing surface. I can also tell you that there is a performance downside to owning a one-piece slate pool table. ![]() This is why it costs more to move or service these types of tables. When there are stairs involved while moving a one-piece slate, it is not just tricky, but downright dangerous carrying all of that weight. They are more difficult to move through hallways, narrow doorways, and corners. They are difficult to maneuver when refelting your pool table. One-piece slates weigh approximately 450 pounds. If you’re asking me, a billiard mechanic with 24 years of experience moving all types of pool tables, I’ll tell you it is a pain in the behind to struggle with a one-piece slate. This is true, but remember that smooth doesn’t always equal level. It is a perfectly smooth surface all the way across. ![]() A one-piece slate has no seams to affect the playing field. When they purchased the table (around 35 years ago), they were told that a one-piece slate was far superior. If you ask an owner of a one-piece slate furniture-style pool table, they will likely give you a different reason. These Fusions don’t really move around the room, but the up and down motion of the legs necessitate the one-piece slate. These Fusion Tables, like the coin-operated ones, have a special frame that holds the slate snug. If you ask an Aramith Fusion Pool Table owner, they’ll tell you they love having a 3/4 inch one-piece slate because it allows their pool table to lower to dining height, then raise again to playing height with a single click. When the pool table is put back into position final leveling is dialed in by commercial-grade leg levelers. The cabinet holding the slate wraps and hugs the slate, so that even when the table is tilted on its side (experience required), it remains locked into place. But, these commercial pool tables are constructed differently. Moving a pool table in one piece can really mess up the seams where the three pieces meet on a three-piece slate. These coin-ops have a 3/4 inch one-piece slate for this reason. If you ask a bar or pub owner, they’ll tell you that they often have to move their coin-operated pool tables around for special events. The rails have open areas that allow the balls to land in the pockets.It’s an age-old question: What’s better a three-piece slate pool table or a one-piece slate? Well, that all depends on who you’re asking. The rails add durability to the table and keep balls from bouncing over the sides. Some use plywood with a wood veneer, while others use solid wood.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |